Filter
Top Products
3
3
Chapter 3 Featured Functions
This chapter explains how to access MOXA EtherDevice Switch’s various configuration,
monitoring, and administration functions. There are three ways to access these functions: serial
console, Telnet console, and web browser. The serial console connection method, which requires
using a short serial cable to connect MOXA EtherDevice Switch to a PC’s COM port, can be used
if you do not know MOXA EtherDevice Switch’s IP address. The Telnet console and web browser
connection methods can be used to access MOXA EtherDevice Switch over an Ethernet LAN, or
over the Internet.
The Web Console is the most user-friendly way to configure MOXA EtherDevice Switch. In this
chapter, we use the Web Console interface to introduce the functions. There are only a few
differences between the Web Console, Serial Console, and Telnet Console.
The following topics are covered:
! Configuring Basic Settings
! Using Port Trunking
! Configuring Port Trunking
! Using SNMP
! Using Communication Redundancy
! Using Traffic Prioritization
! Using Virtual LAN
! Using Multicast Filtering
! Using Rate Limiting
! Using Port Lock
! Using Auto Warning
! Using Line-Swap-Fast-Recovery
! Using Set Device IP
! Using Diagnosis
! Using Monitor
! Using the MAC Address Table
! Using Event Log