Filter
Top Products
EDS-508 Series User’s Manual Featured Functions
3-10
System File Update—By Remote TFTP
MOXA EtherDevice Switch supports saving your configuration file to a remote TFTP server or
local host to allow other EtherDevice Switches to use the same configuration at a later time, or
saving the Log file for future reference. Loading pre-saved firmware or a configuration file from
the TFTP server or local host is also supported for easy upgrading or configuration of the
EtherDevice Switch.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of
TFTP Server
The IP or name of the remote TFTP server.
Must be set up before downloading or
uploading files.
None
Configuration file path and name
Setting Description Factory Default
Max. 40
Characters
The path and file name of EtherDevice
Switch’s configuration file in the TFTP
server.
None
Firmware file path and name
Setting Description Factory Default
Max. 40
Characters
The path and file name of EtherDevice
Switch’s firmware file.
None
Log file path and name
Setting Description Factory Default
Max. 40
Characters
The path and file name of EtherDevice
Switch’s log file
None
After setting up the desired path and file name, click on Activate to save the setting, and then click
on Download to download the prepared file from the remote TFTP server, or click on Upload to
upload the desired file from the remote TFTP server.