Filter
Top Products
EDS-508 Series User’s Manual Featured Functions
3-47
Add Static Unicast MAC Address
Setting Description Factory Default
Unicast MAC
Address
Add the static unicast MAC address into the address
table.
None
Port Fix the static address with a dedicated port. 1
Priority Set the default priority of this static MAC address. High
Configuring Port Lock
Enabling Port Lock
Setting Description Factory Default
Enable/Disable
Check the check box to enable the port lock
function.
None
NOTE
Before enabling “Port Lock”, make sure to add the static unicast MAC address first.
Using Auto Warning
Since industrial Ethernet devices are often located at the endpoints of a system, such devices
cannot always know what is happening elsewhere on the network. This means that an industrial
Ethernet switch that connects these devices must provide system maintainers with real-time alarm
messages. Even when control engineers are out of the control room for an extended period of time,
they can still be informed of the status of devices almost instantaneously when exceptions occur.
MOXA EtherDevice Switch supports different approaches to warn engineers automatically, such
as email and relay output. It also supports two digital inputs to integrate sensors into your system
to automate alarms by email and relay output.
Configuring Email Warning
The Auto Email Warning function uses e-mail to alert the user when certain user-configured
events take place.
There are three basic steps required to set up the Auto Warning function:
1. Configuring Email Event Types
Select the desired Event types from the Console or Web Browser Event type page. (A
description of each event type is given later in the Email Alarm Events setting subsection.)