Filter
Top Products
EDS-508 Series User’s Manual Featured Functions
3-8
DNS IP Address
Setting Descriptions Factory Default
1
st
DNS Server’s
IP Address
Enter the IP address of the DNS Server
used by your network. After entering the
DNS Server’s IP address, you can input
MOXA EtherDevice Switch’s url (e.g.,
www.eds.company.com
) in your
browser’s address field, instead of
entering the IP address.
None
2
nd
DNS Server’s
IP Address
Enter the IP address of the DNS Server
used by your network. EtherDevice
Switch will try to locate the 2
nd
DNS
Server if the 1
st
DNS Server fails to
connect.
None
Time
EtherDevice Switch has a time calibration function based on information from an NTP server or
user specified Time and Date information. Functions such as Auto warning “Email” can add
real-time information to the message.
NOTE
EDS does not have a real time clock. The user must update the Current Time and Current Date
to set the initial time for EDS after each reboot, especially when the network doesn’t have an
Internet connection for NTP server or there is no NTP server on the LAN.
Current Time
Setting Description Factory Default
User adjustable
time.
The time parameter allows
configuration of the local time in local
24-hour format.
00h:00m:00s