Multi-Tech Systems MVP 800 Fax Machine User Manual


 
38
Chapter 4 - MultiVOIP Software
Introduction
This chapter describes the MultiVOIP software to show you how to make changes to the
configuration of your MultiVOIP. The major configuration parameters were established during the
loading of the software (Chapter 3), and the MultiVOIP software and configuration utilities allow you
to make changes to that initial configuration.
The MultiVOIP software allows you to refine your configuration based on your network connections.
The software is based on a main menu (MultiVOIP Configuration) that allows you to consider all the
parameters for a particular feature (for example, voice channels and phone book). These features,
along with others are discussed in detail in the MultiVOIP Configuration section later in this chapter.
The other seven configuration utilities in the MultiVOIP 800 software provide additional functionality.
The Configuration port setup utility enables you to change the method by which you access the
MultiVOIP (through a direct connection of a PC to the Command Port on the MultiVOIP, or via your
Internet or LAN connection to the LAN port on the MultiVOIP). The Date and Time setup utility
enables you to easily set the date and time used for data logging in the MultiVOIP. Download
Factory Defaults enables you to return the configuration to the original factory settings. Download
Firmware enables you to download new versions of firmware as enhancements become available.
Download User Defaults enables you to repeat the download factory defaults process (part of
software installation) and update the MultiVOIP configuration with any necessary changes.
Download Voice Coders enables you to download voice coders to the MultiVOIP after repair or
upgrade. The Uninstall MultiVOIP Configuration utility removes most of the MultiVOIP 800
software from your PC. The UpGrade Software downloads boot code, factory defaults, firmware and
voice coders in an automated process.
Before You Begin
The MultiVOIP software operates in a Microsoft Windows® environment. Your MultiVOIP program
group contains all of the utilities described above, and is accessible in Windows by clicking Start |
Programs | MultiVOIP | (utility), or by double-clicking the utility icon in the program group in My
Computer. The program group is shown here: