Filter
Top Products
39
Chapter 4 - MultiVOIP Software
MultiVOIP Configuration
The MultiVOIP Setup menu consists of 10 buttons in which you can point and click, an Events
window in the middle of the menu, and a status bar at the bottom of the menu. The 10 buttons allow
you to display and change the voice channels and IP protocol parameters, display and manage the
Phone Book listing, define the output of the MultiVOIP, view statistics and call progress, and change
features such as SNMP Agent, Telnet Server, WEB Server, and assign a MultiVOIP password.
The Events window, in the center of the window provides information about the boot process.
The status bar at the bottom of the Setup menu displays the status of the unit, whether the unit is
running, the date that the unit was configured, and the type of connection on the command port. The
last box on the status bar is the Rights box which displays either Read/Write or read-only rights. The
first user to communicate with the MultiVOIP has Read/Write rights. This enables the first user to
change the configuration of the MultiVOIP. A second user has read-only rights which means they can
only display the configuration of the MultiVOIP.