Filter
Top Products
1.5
Getting started
Acceptable document size
The acceptable dimensions as follows:
•In the Automatic Document Feeder(ADF) •On the Flatbed Scanner(FBS) glass
Automatic document feeder (
ADF
) (width × length)
S
INGLE
-
SHEET
M
ULTIPLE
-
SHEET
Maximum: 300 mm × 900 mm 297 mm × 420 mm
Minimum: 120 mm × 100 mm 148 mm × 105 mm
Weight: 30.2 – 104.7 g/m
2
52.3 – 104.7 g/m
2
You can set up to about 50 sheets of A4-, 40 sheets of B4- or 30 sheets of A3-sized
document in the ADF at a time.
Flatbed scanner (
FBS
) glass (width × length)
Maximum: 297 mm × 420 mm
Things not to put in your fax
To avoid paper jams and damage to your machine, don’t insert:
• Folded, curled, torn, wrinkled or very thin pages
• Documents with staples, glue, tape, paper clips or still-wet correction fluid
• “Sticky notes” (or documents with “sticky notes” attached)
• Cardboard, newspaper or fabric
• Pages with duplicating carbon on either side
• Credit cards or any small, thick items
How to set the document
When setting the documents in the Automatic Document Feeder
1
Align your document to the rear left corner.
2
Adjust the document guide to fit your docu-
ments.
3
Set your document face up into the docu-
ment feeder.
Note: You cannot set the different sized docu-
ment at a time.
When setting the documents on the FBS glass
1
Lift the platen cover fully.
2
Set your document face down
on the
FBS
glass. The document
should be aligned to the rear
left corner.
3
Gently close the platen cover.
Note: If you do not lift the platen
cover fully before close it, the
document size will not be detected automatically.
Auto document size detection
The following sized documents are automatically detected.
•A3
•B4
•A4
•B5
•A5
Feed direction
Some guidelines