Filter
Top Products
Beyond the Basics
Enlarge transmission
You can transmit your document with enlarging.
Note: You can select a preset enlargement ratio, or directly enter the ratio using
the numeric keypad. Also, you can use cursor key to enter the ratio.
Note: You can enter the enlargement ratio from 100% through 400% in 1% steps.
Here’s how:
1
Place the document and select resolution and contrast you require.
2
Enter
NEXT
, [EnlrgeTx].
3
If you want to select area that will be
enlarged, proceed to step 4.
Otherwise, skip to step 5.
4
Press [ScanSize] then select scan size that
will be enlarged.
Then press [Enter].
Note: Refer to “Select scanning area to be
sent,” page 1.7.
5
Enter enlargement ratio.
You can use the
REDUCE
/
ENLARGE
key, or
of the cursor key or numeric keypad to enter
enlargement ratio.
6
Press [Enter].
7
Enter the fax number and press
START
.
Fax & Copy
With the Fax & Copy feature turned on, your machine asks if you want to make a
copy of a document each time it transmits that document from memory.
Note: The Fax & Copy function cannot be used for non memory transmissions.
Note: Quick Memory transmission (see page 3.2) and the Fax & Copy function
cannot be used at the same time. If both are turned on, Quick Memory will
not work.
Note: When using the Fax & Copy feature, the Image rotate transmission feature
(see page 3.3) will not work.
Note: The Fax & Copy feature will use the same resolution you set for the trans-
mission for the copy’s scanning resolution.
Using the Fax & Copy function
1
Place the document and select resolution and contrast you require.
Note: With this function, you cannot select Normal and Halftone resolution.
2
Enter
MENU
and select “Fax & Copy”.
3
Press [Enter].
4
Enter the fax number. Either press a one-touch
key, enter a speed-dial number, call group
number or use the numeric keypad to enter
the fax number.
If you entered the fax number using a one-
touch key, skip to step 6.
Otherwise, go on to step 5.
5
Press
START
.
6
The
LCD
changes copy mode and asks the
number of copies you want to make:
7
Use the numeric keypad to enter the number
of copies you want for each page in the docu-
ment. Choose from 01 to 99 copies.
Note: If you want to quit without transmit-
ting and copying the document, press
STOP
. The fax returns to standby mode.
8
Press
START
to begin the transmission and copying process.
A4
A4
2.20