Filter
Top Products
1.1
Getting started
Control panel
1
CONTRAST
— Press to adjust the contrast level.
2
RESOLUTION
— Press to toggle among the three resolution modes and 256-
level grayscale.
3
REDUCE
/
ENLARGE
— Press to choose one of several preset enlargement ratios
for enlarge transmission. (In fax mode, the reduction ratios are not used.)
4
Liquid crystal display (
LCD
) — Shows the machine’s status and lets you
see what you’re programming into the machine.
5
MENU
— Press to access the advanced functions menu.
6
LCD
contrast volume — Use to adjust the contrast of the
LCD
.
7
Status lights
ALARM
light — Glows when a problem occurs during fax communication,
printing or scanning.
COMMUNICATION
light — Glows when the machine is communicating with
another fax machine.
MEMORY RECEIVE
light — Glows when the machine is receiving an incoming
fax document into its electronic memory.
8
Numeric keypad — Just like the numeric keys on a regular tone-dialling
phone. Use these to dial phone and fax numbers and to enter numbers when
you’re setting up the machine.
9
SPEED DIAL
/
TEL INDEX
— Starts a speed-dialling operation, which you finish
by pushing three of the keys on the numeric keypad. Also displays one-touch
and speed-dial entries sorted alphanumerically, as in a telephone directory.
10
REVIEW COMMANDS
— Press to review pending fax commands or to view a
brief description of delayed commands.
11
INTERRUPT
— Press to interrupt the current printing job and make copies.
12
Macro Keys — Programming the Macro keys (
M
1 –
M
6) can reduce many
steps of the operation to a simple press of a key. You can “teach” the Macro
keys to carry out one of the several operations.
13
One-Touch Keys — The keys labeled 01–78 offer one-touch dialling conve-
nience. You also can use the keys labeled 79–84 for programmable functions:
this lets you teach your machine an advanced multi-step function just once,
then recall the function at any time by pressing one of these keys.
2
131415161718192023 22
1
3
21
4 5 6 7 8 9 1011 12