Filter
Top Products
Fax standby display
The
LCD
shows the machine’s status and messages you through operation.
Note: Make sure the machine is in the fax mode. If the machine is not in the fax mode, press
FAX
change to the fax mode.
Select function keys.
You can select the following function in the fax standby mode. Also, these key indications will be changed according the function you are using.
• Redial – See page 1.11. • Enlarge Tx – See page 2.20. • # of Pages – See page 2.21.
• Group – See page 2.7. • Scan Size – See page 1.7.
• Broadcast – See page 2.9. • TTI – See page 1.7.
Panel display (Liquid Crystal Display)
1.3
Getting started
Press
NEXT
. Press
NEXT
.
Machine’s status.
Fax reception mode.
Amount of memory available.
In this area, displays the operational status,
items and any messages.
Various items are displayed according to the operation.
When it is shown with double or more lines, it means that
you can select more items. Press
NEXT
to show the more
items.