Director
38
Enter 4. lterlistto view the pending lter list.
Net Optics> lter list
Filter #1
src_mac=00:00:00:00:00:00 dst_mac=00:00:00:00:00:00
src_ip=0.0.0.0/255.255.255.255,dst_ip=0.0.0.0/255.255.255.255,ip_proto=0006
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=drop
in_ports=
Filter #2
src_mac=00:00:00:00:00:00 dst_mac=00:00:00:00:00:00
src_ip=0.0.0.0/255.255.255.255,dst_ip=0.0.0.0/255.255.255.255,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=redir
in_ports=n1.1
redir_ports=m.1
Filter #3
src_mac=00:00:00:00:00:00 dst_mac=00:00:00:00:00:00
src_ip=0.0.0.0/255.255.255.255,dst_ip=0.0.0.0/255.255.255.255,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=redir
in_ports=n1.2
redir_ports=m.2
IPv4 lter resource utilization: 2%
Net Optics>
Filter list commandFigure 43:
Repeat steps 3 and 4 until the pending lter list is consistent with the desired lter conguration.6.
Enter 7. ltercommit. The contents of the pending lter list are copied to the CAM, activating the new lter
conguration.
Pending lter list
Address Filter
1 n1.1 ip_proto=TCP action=drop
2 n1.1 m.1
3 n1.2 m.2
CAM
Address Filter
1 n1.1 ip_proto=TCP action=drop
2 n1.1 m.1
3 n1.2 m.2
After lter commitFigure 44: