Filter
Top Products
In addition to the antennas, viewed from left to right, the back panel contains the following components:
• LED Off/On switch. Move the LED Off/On switch to to the Off position to turn off all LEDs, except for the Power
LED.
• Reset button. For information about using the Reset button, see Use the Reset Button on page 222.
• Ethernet LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem router to LAN devices.
These ports are colored yellow.
• Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a fiber or cable modem.
This port is colored red.
You can use either the Internet port or the DSL port for WAN connectivity.Note
• DSL port. One RJ-11 DSL port for connecting the modem router to an ADSL or VDSL line.This port is colored
gray. In the previous figure, the DSL port is marked VDSL.
You can use either the DSL port or the Internet port for WAN connectivity.Note
• DC power connector. Connect the power adapter that came in the product package to the DC power connector.
• Power On/Off button. Press the Power On/Off button to provide power to the modem router.
USB Ports on the Left Panel
Two 3.0 USB ports are located on the left panel.
Figure 4. USB ports
eSATA Port on the Right Panel
An eSATA port is located on the right panel.
Hardware Overview of the Modem Router
16
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800