NETGEAR D7800 Network Router User Manual


 
DescriptionField or Column
The number of packets that collided on this port since reset or manual clear.Collisions
The number of bytes per second that were transmitted on this port since reset or manual
clear.
Tx B/s
The number of bytes per second that were received on this port since reset or manual
clear.
Rx B/s
The time elapsed since this port acquired the link.Up Time
DSL Link
In addition to the xDSL firmware version, the page displays the ADSL link information that is described in this table.
The downstream and upstream connection speed rates in Mbps.Connection Speed
The downstream and upstream line attenuation (LATN) in dB. The LATN expresses the
signal quality.
Line Attenuation
The downstream and upstream signal-to-noise ratio margin (SNRM) in dB. The SNRM
expresses the signal quality in relation to interference.
Noise Margin
The interval at which the statistics are updated on this page.Poll Interval
Change the Traffic Statistics Polling Frequency
You can change the polling frequency or stop traffic polling.
To change the traffic statistics polling frequency or stop polling:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > ADVANCED Home.
The ADVANCED Home page displays.
5. In the Internet Port pane, click the Show Statistics button.
Manage the Modem Router and Monitor the Traffic
230
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800