Filter
Top Products
DescriptionField
These settings are disabled because they do not apply to a VDSL connection.
Multiplexing Method
VPI
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service
such as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID
check box cleared, which is the default setting.
Use VLANID
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
Priority (0 ~ 7)
By default, the menu selection is PPPoE for a PPP over Ethernet VDSL connection.
The VDSL connection does not support PPP over ATM (PPPoA).
Internet Service Provider
Enter the login name that you use to log in to your Internet service, as indicated by
your ISP.
This login name is often an email address.
Login
Enter the password that you use to log in to your Internet service, as indicated by
your ISP.
Password
Enter the service name that you use to log in to your Internet service, as indicated
by your ISP.
Often, a service name is not required.
Service Name (If Required)
Select how the Internet connection functions:
• Always On. Once the Internet connection is established, it remains active.This
is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet, the
Internet connection is established. When the idle time-out period expires, the
Internet connection is terminated.
• Manually Connect.You must connect to the Internet manually (see View,
Establish, or Terminate the PPPoE or PPPoA Internet Connection on page 232).
Connection Mode
Manage the Internet Settings Manually
66
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800