NETGEAR M4100-D12G-POE+ Switch User Manual


 
1
2
3
4
5
6
7
<slot/port>| all
Switching Commands
118
ProSafe M4100 and M7100 Managed Switches
no port-channel load-balance
This command reverts to the default load balancing configuration.
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot/port
for a configured port-channel, and <name> is an alphanumeric string up to 15 characters.
Format port-channel name {<logical slot/port> | <name>}
Mode
port-channel system priority
Use this command to configure port-channel system priority. The valid range of <priority> is
0-65535.
Term Definition
Source MAC, VLAN, EtherType, and incoming port associated with the packet
Destination MAC, VLAN, EtherType, and incoming port associated with the packet
Source/Destination MAC, VLAN, EtherType, and incoming port associated with the
packet
Source IP and Source TCP/UDP fields of the packet
Destination IP and Destination TCP/UDP Port fields of the packet
Source/Destination IP and source/destination TCP/UDP Port fields of the packet
Enhanced Hashing Mode
Global Config Mode only: The interface is a logical slot/port number of a configured
port-channel. "All" applies the command to all currently configured port-channels.
Format no port-channel load-balance {<slot/port> | <all>}
Mode
Interface Config
Global Config
Term Definition
<slot/port>| all
Global Config Mode only: The interface is a logical slot/port number of a configured
port-channel. "All" applies the command to all currently configured port-channels.
Global Config
Default
0x8000