NETGEAR M4100-D12G-POE+ Switch User Manual


 
Utility Commands
567
ProSafe M4100 and M7100 Managed Switches
lease
This command configures the duration of the lease for an IP address that is assigned from a
DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes.
If you specify infinite, the lease is set for 60 days. You can also specify a lease duration.
Days is an integer from 0 to 59. Hours is an integer from 0 to 23. Minutes is an integer from
0 to 59.
Default
Format lease [{<days> [<hours>] [<minutes>] | infinite}]
Mode
no lease
This command restores the default value of the lease time for DHCP Server.
Format no lease
Mode
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on
the server. Network-number is a valid IP address, made up of four decimal bytes ranging
from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified
address pool. The prefix-length is an integer from 0 to 32.
Default
Format network <networknumber> [{<mask> | <prefixlength>}]
Mode
no network
This command removes the subnet number and mask.
Format no network
Mode
bootfile
The command specifies the name of the default boot image for a DHCP client. The
<filename> specifies the boot image file.
Format bootfile <filename>
Mode
1 (day)
DHCP Pool Config
DHCP Pool Config
none
DHCP Pool Config
DHCP Pool Config
DHCP Pool Config