Filter
Top Products
IPv6 Commands
400
ProSafe M4100 and M7100 Managed Switches
Maximum
Number of
Retransmit
Entries
The maximum number of LSAs that can be waiting for acknowledgment at any given
time.
Retransmit
Entries High
Water Mark
The highest number of LSAs that have been waiting for acknowledgment.
External LSDB
Limit
The maximum number of non-default AS-external-LSAs entries that can be stored in the
link-state database.
Default Metric
Default value for redistributed routes.
Default Passive
Setting
Shows whether the interfaces are passive by default.
Default Route
Advertise
Indicates whether the default routes received from other source protocols are advertised
or not.
Always
Shows whether default routes are always advertised.
Metric
The metric for the advertised default routes. If the metric is not configured, this field is
blank.
Metric Type
Shows whether the routes are External Type 1 or External Type 2.
Number of
Active Areas
The number of active OSPF areas. An “active” OSPF area is an area with at least one
interface up.
AutoCost Ref
BW
Shows the value of the auto-cost reference bandwidth configured on the router.
Maximum Paths
The maximum number of paths that OSPF can report for a given destination.
Redistributing
This field is a heading and appears only if you configure the system to take routes
learned from a non-OSPF source and advertise them to its peers.
Source
Shows source protocol/routes that are being redistributed. Possible values are static,
connected, BGP, or RIP.
Metric
The metric of the routes being redistributed.
Metric Type
Shows whether the routes are External Type 1 or External Type 2.
Tag
The decimal value attached to each external route.
Subnets
For redistributing routes into OSPF, the scope of redistribution for the specified protocol.
Distribute-List
The access list used to filter redistributed routes.
Term Definition