Filter
Top Products
Quality of Service (QoS) Commands
471
ProSafe M4100 and M7100 Managed Switches
If the Policy Name is not specified this command displays a list of all defined DiffServ
policies. The following fields are displayed:
Policy Name
Policy Type
Class Members
show diffserv service
This command displays policy service information for the specified interface and direction.
The <slot/port> parameter specifies a valid slot/port number for the system.
Format show diffserv service <slot/port> [in | out]
Mode
DiffServ Admin
Mode
Interface
Direction
Operational
Status
Policy Name
Policy Details
show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been
attached. The inbound direction parameter is optional.
Format show diffserv service brief [in | out]
Mode
Policing Style
The style of policing, if any, used (simple).
Redirect
Forces a classified traffic stream to a specified egress port (physical or LAG). This can
occur in addition to any marking or policing action. It might also be specified along with a
QoS queue assignment.
Term Definition
The name of this policy. (The order in which the policies are displayed is not necessarily
the same order in which they were created.)
The policy type (Only inbound is supported).
List of all class names associated with this policy.
Privileged EXEC
Term Definition
The current setting of the DiffServ administrative mode. An attached policy is only in
effect on an interface while DiffServ is in an enabled mode.
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service interface.
The name of the policy attached to the interface in the indicated direction.
Attached policy details, whose content is identical to that described for the show
policy-map <policymapname> command (content not repeated here for brevity).
Privileged EXEC
Term Definition