Filter
Top Products
IPv6 Multicast Commands
438
ProSafe M4100 and M7100 Managed Switches
ipv6 mld-proxy
Use this command to enable MLD-Proxy on the router. To enable MLD-Proxy on the router,
you must enable multicast forwarding. Also, make sure that there are no other multicast
routing protocols enabled n the router.
Format ipv6 mld-proxy
Mode
no ipv6 mld-proxy
Use this command to disable MLD-Proxy on the router.
Format no ipv6 mld-proxy
Mode
ipv6 mld-proxy unsolicit-rprt-interval
Use this command to set the unsolicited report interval for the MLD-Proxy router. This
command is only valid when you enable MLD-Proxy on the interface. The value of <interval>
is 1-260 seconds.
Default 1
Format ipv6 mld-proxy unsolicit-rprt-interval <interval>
Mode
no ipv6 mld-proxy unsolicited-report-interval
Use this command to reset the MLD-Proxy router’s unsolicited report interval to the default
value.
Format no ipv6 mld-proxy unsolicit-rprt-interval
Mode
ipv6 mld-proxy reset-status
Use this command to reset the host interface status parameters of the MLD-Proxy router.
This command is only valid when you enable MLD-Proxy on the interface.
Format ipv6 mld-proxy reset-status
Mode
Interface Config
Interface Config
Interface Config
Interface Config
Interface Config