NETGEAR M4100-D12G-POE+ Switch User Manual


 
Switching Commands
162
ProSafe M4100 and M7100 Managed Switches
interface. MLD Snooping functionality is re-enabled if you disable routing or remove port
channel (LAG) membership from an interface that has MLD Snooping enabled.
MLD Snooping supports the following activities:
V
alidation of address version, payload length consistencies and discarding of the frame
upon error.
Maintenance of the forwarding table entries based on the MAC address versus the IPv6
address.
Flooding of unregistered multicast data packets to all ports in the VLAN.
Default
Format set mld
vlanid
Mode
• Global Config
• Interface Config
• VLAN Mode
no set mld
Use this command to disable MLD Snooping on the system.
Format set mld vlanid
Mode
• Global Config
• Interface Config
• VLAN Mode
set mld interfacemode
Use this command to enable MLD Snooping on all interfaces. If an interface has MLD
Snooping enabled and you enable this interface for routing or enlist it as a member of a
port-channel (LAG), MLD Snooping functionality is disabled on that interface. MLD Snooping
functionality is re-enabled if you disable routing or remove port-channel (LAG) membership
from an interface that has MLD Snooping enabled.
Default
Format set mld interfacemode
Mode
no set mld interfacemode
Use this command to disable MLD Snooping on all interfaces.
Format no set mld interfacemode
Mode
disabled
disabled
Global Config
Global Config