Filter
Top Products
116
Creating ftp Profiles Using Camera Menus
Appendices
Creating ftp Profiles Using
Camera Menus
In transfer mode, the camera menus can be used in place of the
Wireless Transmitter Utility to create ftp profiles. Before creating an ftp
profile with the camera menus, connect the UT-1. To prevent
unexpected loss of power, be sure the battery is fully charged or use
an optional EP-5B power connector and EH-5b AC adapter.
1 Open the UT-1 USB connector cover and
connect the USB cable from the UT-1 to
the camera USB connector.
2 Turn the camera on.
D Using the Menus
If the shutter-release button on the camera is pressed while menus are
displayed, the monitor will turn off and any changes to the current profile
will be lost.
A Firewalls
The UT-1 uses TCP ports 21 and 32768–61000 for ftp. It may be necessary
to adjust firewall settings before connecting to a server behind a firewall.
A Editing Existing ftp Profiles
See page 73 for information on using camera menus to edit existing ftp
profiles.
Power switch