Nikon UT-1 Network Hardware User Manual


 
7
Supported Modes
Introduction
A FTP Servers
Servers can be configured using standard ftp services available with
supported operating systems, such as IIS (Internet Information Services).
Connection to computers on other networks via a router, Internet ftp
connections and ftp servers running third-party software are not
supported.
A Ethernet Connection
The camera can not connect to a wireless LAN when an Ethernet cable is
connected. Before connecting to a wireless LAN, turn the UT-1 off and
disconnect the Ethernet cable.
No adjustments to wireless LAN settings are required when the camera is
connected to a LAN by an Ethernet cable.
A Routers
Connection to computers on other networks via a router is not supported.
A Firewall Settings
The UT-1 uses TCP ports 21 and 32768 through 61000 for ftp and TCP port
15740 and UDP port 5353 when connecting to a computer. Computer
firewalls must be configured to allow access to these ports, as otherwise
the computer may not be able to access the UT-1.
A MAC Address Filtering
If the network uses MAC address filtering and the UT-1 is connected to a
WT-5, the filter must be supplied with the MAC address of the WT-5. After
connecting the WT-5, choose Device info > MAC address (092) from the
camera setup menu and note the wireless and Ethernet MAC addresses.