Filter
Top Products
42
PC Mode / Connecting to the Computer
Using the UT-1 with a Computer
PC Mode
In PC mode, a camera equipped with a UT-1 can be controlled over a
wireless or Ethernet network from a computer running Camera
Control Pro 2 (available separately) and photographs saved directly
to the computer hard disk instead of the camera memory card
(movies are still recorded to the memory card and can consequently
only be recorded when a memory card is inserted in the camera).
Connecting to the Computer
Before connecting the UT-1, confirm that the host computer is
running and the user is logged in.
1 After turning the camera off, open the UT-1 USB connector
cover and connect the USB cable from the UT-1 to the camera
USB connector (for more information on connecting USB
cables to the camera, see the camera manual).
2 Connect the Ethernet cable or wireless transmitter.
Ethernet networks
: To access the network via Ethernet, confirm that
the camera is off and connect the Ethernet cable to the computer
and UT-1 as shown. Do not use force or insert the connectors at
an angle. Note that wireless transfer is disabled while an Ethernet
cable is connected; before accessing a wireless network, turn the
UT-1 off and disconnect the Ethernet cable.
Wireless networks: Connect the WT-5 wireless transmitter as
described on page 8.