Filter
Top Products
33
Uploading Pictures to a Host Computer / Connecting the UT-1
Using the UT-1 with a Computer
Uploading Pictures to a Host
Computer
Connecting the UT-1
Before connecting the UT-1, confirm that the host computer is
running and the user is logged in.
1 Turn the camera off and insert the
memory card containing the pictures to
be sent (if the camera is equipped with
multiple memory card slots, the card can
be inserted into any slot).
2 Open the UT-1 USB connector cover and
connect the USB cable from the UT-1 to
the camera USB connector (for more
information on connecting USB cables to
the camera, see the camera manual).
3 Connect the Ethernet cable or wireless transmitter.
Ethernet networks: Connect the Ethernet cable to the computer
and UT-1 as shown. Do not use force or insert the connectors
at an angle.
Wireless networks: Connect the WT-5 wireless transmitter as
described on page 8.
16
GB