Filter
Top Products
Copying Network Profiles to the Camera
Using the UT-1 with a Computer30
11
If the network is configured to supply IP addresses automati-
cally using a DHCP server or Auto IP, select Obtain IP address
automatically and click Next. Otherwise remove the check
from this option and enter the following information before
clicking Next:
• Obtain IP address automatically: Select this option if the network
is configured to supply IP addresses automatically. If the
network does not include a DHCP server, addresses will be
supplied by Auto IP.
• IP address: If the network is configured for manual IP
addressing, enter an IP address for the UT-1.
• Subnet mask: If the network is configured for manual IP
addressing, enter a subnet mask for the UT-1.
• Default gateway: If the network requires a gateway address,
select this option and enter the address supplied by the
network administrator.
• DNS Server: If a Domain Name Server exists on the network,
select this option and enter the address supplied by the
network administrator.