Filter
Top Products
11
Preparing the UT-1
Introduction
A Removing the Battery
Being careful not to drop the battery, open the
battery-chamber cover and remove the battery as
shown at right.
A Stand-By Mode
When disconnected from the camera, the UT-1 will turn off automatically
after the delay chosen for the Auto power off option in the Wireless
transmitter menu (093), reducing the drain on the battery.
A Battery Level
The level of the battery inserted in the UT-1 can be determined by
connecting the UT-1 to the camera (033, 62) and checking the battery
level using the Battery info option (092) in the camera setup menu.
A Using an AC Adapter
An optional EP-5B power connector and EH-5b or EH-5/EH-5a AC adapter
can also be used to power the camera when the UT-1 is connected.