Filter
Top Products
October 2006 1002rp server description
1002rp Server Hardware Installation 29
Network requirements
Appropriate networking equipment must be available for both the CLAN
and ELAN.
The CLAN and ELAN must be properly configured for correct CallPilot
operation. To ensure correct configuration, Nortel recommends that you
consult a network specialist.
Remote access connectivity
The RS-232 COM1 connector on the rear of the 1002rp server provides the
connection to an external modem. The modem allows administrators and
technical support personnel to administer the 1002rp server from a remote
location.
pcAnywhere is used to establish the remote access connection to the server.