Filter
Top Products
Installing the server and connecting the peripheral devices Standard 1.07
62 CallPilot
Modem DIP switches
Set the modem DIP switches before you connect the modem to the CallPilot
server.
Note: This section applies only to the U.S. Robotics 56-Kbit/s external
Sportster modem. If your modem is different, refer to the documentation for
your modem.
The following diagram shows the key components of the external modem,
including the location and required settings of the DIP switches:
G101445
RJ-11
connection
DIP
switches
Switch positions:
Serial cable
(RS-232)
connection
Power
connection
12345678
12345678
OFF
ON