Filter
Top Products
1002rp server description Standard 1.07
30 CallPilot
Supported peripheral devices
Introduction
This section identifies external devices that are supported by the 1002rp
server.
Device Description
Modem A 56-Kbit/s external modem (NTRH9078) provides
remote access to the 1002rp server. The modem connects
to the RS-232 COM1 connector on the rear of the server.
Since the modem is an external device, it requires its
own AC power source referenced to the same ground as
the 1002rp server and the switch to which it is connected.
Ethernet hub A 10Base-T Ethernet hub provides the ELAN connection
between the 1002rp server and the Meridian 1 switch or
Succession 1000 system. The customer can supply a hub
or switch from third-party vendors or from Nortel.
Since the hub is an external device, it requires an AC
power source.
ATTENTION
To comply with EMC radiation requirements, a Class A
hub must be located 10 m (33 ft) away from the 1002rp
server. Shielded Ethernet cables must be used.
Monitor, keyboard,
and mouse
15-in. monitor: NTRH9011 or N0038380 LCD
monitor.
Since the monitor is an external device, it requires its
own AC power source.
Keyboard: NTRH9013
Mouse: NTRH9014