Filter
Top Products
Chapter 2 Nortel VPN Router 1750 chassis 43
Nortel VPN Router Installation — VPN Router 1750
1 Attach a cage nut in four locations at the front of the rack, if the holes in the
vertical supports of the rack are not threaded.
2 Position the rack-mount shelf inside the rack as shown in the following
graphic.
3 Align the holes in the shelf with holes in the front of the rack.
4 Snap the support flange into place. Ensure that the alignment pin above the
flange fits into the appropriate hole.
5 Insert one of the supplied panhead screws through the top hole on each side of
the shelf into the hole in the rack, and tighten the screws.
CS260003A
Cage nut
Rail
without
threaded
holes
CS260003A
Flange
Rack edge