Nortel Networks 1750 Network Card User Manual


 
60 Chapter 3 Option card and DIMM installation
NN46110-316 03.01
6 Replace the top cover on the chassis.
7 Hold the cover at an angle, and slide it onto the chassis.
8 Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
9 If you want to install the VPN Router 1750 in an equipment rack, mount it in
the rack.
10 Set the VPN Router 1750 on the rack-mount shelf in the rack.
11 Insert one of the panhead screws through the bottom hole on each side of the
shelf into the hole in the rack, and tighten the screws.
12 Replace the front bezel.
13 Hold the bezel by the two handles, and push it onto the chassis.
14 Use the screwdriver to tighten the two screws that secure the bezel to the
chassis.