Filter
Top Products
Chapter 3 Option card and DIMM installation 57
Nortel VPN Router Installation — VPN Router 1750
8 If you want to install the VPN Router 1750 in an equipment rack, mount it in
the rack.
9 Set the VPN Router 1750 on the rack-mount shelf in the rack.
10 Insert one of the panhead screws through the bottom hole on each side of the
shelf into the hole in the rack, and tighten the screws.
11 Replace the front bezel.
12 Hold the bezel by the two handles, and push it onto the chassis.
13 Use a screwdriver to tighten the two screws that secure the bezel to the
chassis; see the following figure.
Installing and replacing DIMMs
The VPN Router 1750 has two slots for DIMMs. Unless you order additional
memory, Nortel ships the VPN Router 1750 with one 128 Megabit (MB) DIMM
installed. You can install a second 128 MB DIMM to upgrade memory in the
gateway.
Caution: If you use a memory module not purchased from Nortel, you
can render your warranty or your service contract void.
CS260005E
Press here