61
Nortel VPN Router Installation — VPN Router 1750
Chapter 4
Management IP interface configuration
This chapter describes how to configure a management Internet Protocol (IP)
address, subnet mask, and default gateway address on a newly installed VPN
Router 1750. After you complete the procedures in this chapter, you can configure
and manage the VPN Router 1750 by using a Web browser from a PC.
To configure the management IP interface, you can use the serial interface
configuration menu. You must connect a PC or terminal to the serial port on the
VPN Router 1750.
This chapter contains the following topics:
• “Required information” on page 62
• “Configuring the management IP address” on page 63
• “Testing the configuration” on page 67
• “Troubleshooting” on page 68