Filter
Top Products
104 Chapter 3 Using the console interface
212859-A
• When the in-band IP address is not set from the console terminal, the switch
broadcasts BootP requests until it receives a BootP reply containing an
in-band IP address. If the switch does not receive a BootP reply that contains
an in-band IP address within 10 minutes, the switch uses the last in-band IP
address it received from a BootP server. This IP information is displayed in
the Last BootP column.
If an IP address is not currently in use, these actions take effect immediately. If an
IP address is currently in use, these actions take effect only after the switch is reset
or power cycled.
SNMP Configuration screen
The SNMP Configuration screen (Figure 46) allows you to set or modify the
SNMP configuration parameters.
To open the SNMP Configuration screen:
Figure 46 SNMP Configuration screen
Choose SNMP Configuration (or press m) from the main menu.