Filter
Top Products
Chapter 2 Network configuration 83
Using the BayStack 380 10/100/1000 Switch
• Trunk Name indicates optional fields for assigning names to the
corresponding configured trunks.
The names chosen for this example provide meaningful information to the
user of this switch (for example, S2:T2 to S1 indicates that Trunk 1, in Switch
S2, connects to Switch 1).
Trunk Configuration screen for Switch S3
As shown in Figure 32 on page 77, Switch S3 is set up with one trunk
configuration (T4). This trunk connects directly to Switch S1.
As in the previous screen examples, to set up an interswitch trunk configuration,
choose MultiLink Trunk Configuration from the MultiLink Trunk Configuration
Menu screen.
Figure 37 shows the MultiLink Trunk Configuration screen for Switch S3.
Figure 37 MultiLink Trunk Configuration screen for Switch S3