Filter
Top Products
Chapter 3 Using the console interface 169
Using the BayStack 380 10/100/1000 Switch
Table 39 describes the Configuration File Download/Upload screen fields.
Table 39 Configuration File Download/Upload screen fields
Field Description
Configuration Image
Filename
The file name you have chosen for the configuration file. Choose a
meaningful file name that will allow you to identify the file for retrieval when
required. The file must already exist on your TFTP server and must be read/
write enabled.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
TFTP Server IP Address The IP address of your TFTP load host.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is
represented as a decimal value, separated by a decimal
point
Copy Configuration
Image to Server
Specifies whether to copy the presently configured switch parameters to the
specified TFTP server (default is No).
Use the spacebar to toggle the selection to Yes.
Press [Enter] to initiate the process.
Default Value No
Range Yes, No
Retrieve Configuration
Image from Server
Specifies whether to retrieve the stored switch configuration parameters from
the specified TFTP server (default is No). If you choose Yes, the download
process begins immediately and, when completed, causes the switch to reset
with the new configuration parameters.
Use the spacebar to toggle the selection to Yes.
Press [Enter] to initiate the process.
Default Value No
Range Yes, No