Filter
Top Products
Chapter 2 Network configuration 91
Using the BayStack 380 10/100/1000 Switch
Port mirroring
You can designate one of your switch ports to monitor ingress traffic on a single
specified switch port (port-based).
Figure 38 provides a sample Port Mirroring Configuration screen. Note that the
displayed screens do not show all of the screen prompts that precede some
actions.
For example, when you configure a switch for port mirroring or when you modify
an existing port mirroring configuration, the new configuration does not take
effect until you respond [Yes] to the following screen prompt:
Figure 42 Port Mirroring Configuration port-based screen example
Is your port mirroring configuration complete? [ Yes ]