Filter
Top Products
Chapter 3 Using the console interface 109
Using the BayStack 380 10/100/1000 Switch
Table 12 describes the Switch Configuration Menu options.
Table 12 Switch Configuration Menu options
Option Description
MAC Address Table Displays the MAC Address Table screen (see “MAC Address Table
screen” on page 110). This screen allows you to view all MAC
addresses and their associated port or trunk that the switch has
learned, or to search for a particular MAC address (to see if the switch
has learned the address).
MAC Address Security
Configuration...
Displays the MAC Address Security Configuration menu (see “MAC
Address Security Configuration Menu screen” on page 111). This
screen allows you to set up the MAC address security feature and
provides the following options: MAC Address Security Configuration,
MAC Address Security Port Configuration, and MAC Address Security
Table. This menu allows you to enable and disable security features
on the port and trunk levels.
VLAN Configuration...
Displays the VLAN Configuration Menu (see “VLAN Configuration
Menu screen” on page 120). This menu provides the following
options: VLAN Configuration, VLAN Port Configuration, VLAN Display
by Port, MAC-SA, and Return to Switch Configuration Menu screen.
This menu allows you to create and modify VLANs.
Port Configuration... Displays the Port Configuration screen (see “Port Configuration
screen” on page 131). This screen allows you to configure a specific
switch port, or all switch ports.
High Speed Flow Control
Configuration...
Displays the High Speed Flow Control Configuration screen.
MultiLink Trunk Configuration... Displays the MultiLink Trunk Configuration Menu (see “MultiLink Trunk
Configuration Menu screen” on page 136). This menu provides the
following options: MultiLink Trunk Configuration, MultiLink Trunk
Utilization, and Return to Switch Configuration Menu screen. This
menu allows you to create and modify trunks, and to monitor the
bandwidth utilization of configured trunks.
Port Mirroring Configuration... Displays the Port Mirroring Configuration screen (see “Port Mirroring
Configuration screen” on page 142). This screen allows you to
designate a single switch port as a traffic monitor for one specific port.
Display Port Statistics Displays the Port Statistics screen (see “Port Statistics screen” on
page 144). This screen allows you to view detailed information about
any switch port.
Clear All Port Statistics Allows you to clear all port statistics.
This option is followed by screen prompts that precede a choice of the
actions:
• Choose one of the following:
• Yes, to clear all port statistics for all switch ports
• No, to abort the option