Filter
Top Products
205
Using the BayStack 380 10/100/1000 Switch
Appendix E
Default settings
Table 58 lists the factory default settings for the BayStack 380 Switch according
to the console interface (CI) screens and fields for the settings.
Table 58 Factory default settings
Field Default setting Appears in this CI screen
BootP Request Mode BootP Disabled “IP Configuration/Setup screen” on
page 99
In-Band Switch IP Address 0.0.0.0
(no IP address assigned)
In-Band Subnet Mask 0.0.0.0
(no subnet mask assigned)
Default Gateway 0.0.0.0
(no IP address assigned)
Read-Only Community String public “SNMP Configuration screen” on
page 104
Read-Write Community String private
Trap IP Address 0.0.0.0
(no IP address assigned)
Community String Zero-length string
Authentication Trap Enabled
Link Up/Down Trap Enabled
sysContact Zero-length string “System Characteristics screen” on
page 106
sysName Zero-length string
sysLocation Zero-length string