Filter
Top Products
124 Chapter 3 Using the console interface
212859-A
VLAN Port Configuration screen
The VLAN Port Configuration screen (Figure 58) allows you to configure
specified switch ports with the appropriate PVID/VLAN association that enables
the creation of VLAN broadcast domains (see “Shared servers” on page 63 for
more information about setting up VLAN broadcast domains).
You can configure specified switch ports to filter (discard) all received untagged
frames (see “IEEE 802.1Q VLAN workgroups” on page 55).
To open the VLAN Port Configuration screen.
The Port Membership fields are displayed in six-port groups (for example, 1-6, 7-12,
13-18). The number of ports displayed depends on the switch model or type of
optional GBIC installed in the Uplink Module slot.
Default U (All ports are assigned as untagged members of VLAN 1.)
Range U, T, and -
Choose VLAN Port Configuration (or press c) from the VLAN
Configuration Menu screen.
Table 19 VLAN Configuration screen fields (continued)
Field Description