Filter
Top Products
Chapter 1 BayStack 380 Switch 33
Using the BayStack 380 10/100/1000 Switch
For further information, refer to Installation and Reference for the BayStack 10
Power Supply Unit (part number 208296-C). Contact your Nortel Networks sales
representative for more information.
DC-DC module
The 100 Watt DC-DC Converter operates in conjunction with the Nortel Networks
BayStack 10 Power Supply Unit and 200 Watt AC/DC Power Supply Module.
The 100 Watt DC-DC Converter (Order number AA0005010) provides a
plug-and-play redundant power supply unit for the BayStack 380 Switch, as well
as other products available from Nortel Networks. Contact your Nortel Networks
sales representative for information about the Nortel Networks products that use
the 100 Watt DC-DC Converter.
AC power receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications. Table 4 lists specifications for
international power cords.
Table 4 International power cord specifications
Country/Plug description Specifications Typical plug
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
220 or 230 VAC
50 Hz
Single phase
U.S./Canada/Japan:
• NEMA5-15P male plug
• UL recognized (UL stamped
on cord jacket)
• CSA certified (CSA label
secured to the cord)
100 or 120 VAC
50–60 Hz
Single phase
228FA
227FA