Filter
Top Products
140 Chapter 3 Using the console interface
212859-A
MultiLink Trunk Utilization screen
The MultiLink Trunk Utilization screen (Figure 68 and Figure 69) allows you to
monitor the percentage of bandwidth used by configured trunk members. You can
choose the type of traffic to monitor.
Figure 68 shows an example of bandwidth utilization rates for the trunk member
ports configured in Figure 67. Because two screens are necessary to show all of
the configured trunks (up to six), the screen prompts you to Press [Ctrl]-N to view
trunks five and six.
Choose MultiLink Trunk Utilization (or press u) from the MultiLink Trunk
Configuration Menu screen to open the MultiLink Trunk Utilization screen.
Figure 68 MultiLink Trunk Utilization screen (1 of 2)