Oki 7120e Printer User Manual


 
OkiLAN 7120e Network User’s Guide
15
Printer Trap
Setup . . .
By selecting the button, the following dialogue box is
displayed:
In the dialogue box, the following items can be configured:
Printer Trap
Community Name
This community name is assigned to
outgoing printer status traps such as
off-line, paper out, etc.
TCP#1—5 Set the IP address to which a Trap packet
will be sent. You can set up to five IP
addresses.
Detail . . . In the dialogue box, the following items can
be configured:
Trap Enable Set sending a Trap
packet, enabled or
disabled, for each
destination.
On-line Set sending a Trap,
enabled or disabled,
when the printer turns
to ON-LINE.
Off-line Set sending a Trap,
enabled or disabled,
when the printer turns
to OFF-LINE.
Paper Out Set sending a Trap,
enabled or disabled,
when paper is out.
Printer Error Set sending a Trap,
enabled or disabled,
when the printer error
occurs.
Exit JAM Set sending a Trap,
enabled or disabled,
when an Exit JAM
occurs.
Location Comments