Filter
Top Products
OkiLAN 7120e Network User’s Guide
18
E-mail (Send) Tab
In E-mail (Send) tab, you can configure SNMP related items.
Location Comments
Use SMTP
Transmit Protocol
Set sending E-Mail via SMTP, enabled or disabled.
SMTP Server
Address/Name
Set IP address or host name of SMTP server.
Reply-To Address Set the E-Mail address that is used in the [Reply-To]
field in the mail header.
E-Mail Address Set the E-Mail address that is used in the [From] field in
the mail header.
1—5 By selecting each button, the following dialogue box is
displayed:
In the dialogue box, the following items can be
configured:
Available
condition and
Selected
condition
Select each E-Mail alert condition.
Select a condition from Available
Condition list and click >> button.
The selected condition is copied to
Selected condition list. Available
conditions are:
On-line, Off-line, Paper Out, Printer
Error, Exit JAM, Insert JAM, Park
JAM, Paper Lever Alarm, Cover
Open, Feed JAM, Ribbon JAM and
Paper JAM.
1-5 To Address 1—5 Set E-Mail addresses to that E-Mail
should be send. Up to five E-Mail
addresses can be set.
Check Interval Set interval that the OkiLAN 7120e
checks specified event(s). An E-Mail
is sent when specified event(s)
occurs when DISABLE is selected.