OkiLAN 7120e Network User’s Guide
24
Option Menu
In the [Option] menu, the following item can be selected:
Help Menu
In the [Help] menu, [About] is available as well as revision information for
AdminManager.
Using a Web browser
If the OkiLAN 7120e is connected to the network using TCP/IP, its settings
and the printer menu settings can be configured using a Web browser,
Item Function
Use TCP/IP
Protocol
If this item is selected, AdminManager uses TCP/IP
protocol to search/configure network interface cards.
Use IPX/SPX
Protocol
If this item is selected, AdminManager uses IPX/SPX
protocol to search/configure network interface cards.
Environment
Setup
TCP/IP Tab Set broadcast addresses that are
used to search Oki network interface
cards using the TCP/IP protocol. If
[Use TCP/IP protocol] is unchecked,
the search will not be carried out
using TCP/IP.
NetWare Tab Set network addresses that are used
to search Oki network interface cards
via NetWare protocol. If there any
many NetWare file servers on your
network, specify the network address
to which the network card belongs. If
[Use NetWare protocol] is unchecked,
the search will not be carried out
using NetWare, but if [Auto Search] is
selected, AdminManager will search
all networks that AdminManager can
detect.
SNMP Tab
TimeOut Tab [Search Every]: Set response waiting
time from a network card in seconds.
[Time Out]: Set time out between
AdminManager and the network
interface card in seconds.
[Retry]: Set how many times the
retry will be carried out between
AdminManager and the network
interface card.