User’s Guide 15
English
User Maintenance Menu
ITEM
MENU
HEX DUMP
RECEIVE BUFFER
OP MENU
X ADJUST
Y ADJUST
SETTING / ACTION
RESET
—
AUTO*, 8KB-1MB
ENABLE
DISABLE
-2.00 ~ +2.00
-2.00 ~ +2.00
EXPLANATION
Resets all Menu 1 settings to factory defaults.
Prints received data in ASCII HEX format (e.g. “A” is printed as “41”, “B” as
“42”, etc.). Used by programmers and systems specialists such as network
administrators. When data length exceeds one page, that page will print and
eject automatically. When data is less than one page, take the printer OFF
LINE and press the
Form Feed
key to print and eject the page. To exit this
mode the printer must be switched off.
Sets the size of the data receive buffer.
Can disable the operator panel controls so that users cannot change menu
settings.
Adjusts the position printed image on the page horizontally (X) or vertically
(Y) in increments of 0.25mm. Any part of the printed image which is moved
out of the printable page area will be clipped. Useful for accurate print
alignment on pre-printed forms.