Filter
Top Products
User’s Guide 7
English
To cycle through the available settings when a menu item is
displayed, press the
←←
←←
← or
→→
→→
→ keys to move through the available
settings in either direction.
To choose the currently displayed setting and make it active,
press the ENTER key. An asterisk (*) character will appear
next to the chosen setting.
To exit the menu, press the ON LINE key to return the printer
to the ON LINE (ready) condition.
Viewing and Using the User Maintenance Menu
This is a special menu used for functions, such as disabling or
enabling the operator panel controls.
The user maintenance menu is organised in two levels: Items
and Settings.
To enter this menu you must first switch the printer off.
Whenever you switch the printer off, it is a good idea to wait for
at least ten seconds before switching it on again, to ensure that
memory contents are properly cleared and internal power
supplies are allowed to settle.
Hold down the MENU 1 / Menu 2 key and switch the printer
on.
Continue holding down the MENU 1 / Menu 2 key until the
menu name (USER MNT) appears.
Press and release the MENU 1 / Menu 2 key to cycle through
the available items. When the item you require is displayed,
press the ENTER key to select it.
Some user maintenance menu items can be exited by pressing
the ON LINE key to return the printer to the ON LINE (ready)
condition. However, to exit from some other items you will need
to switch the printer off and back on again. (Remember to wait
at least ten seconds before restoring power.)
The tables on the next several pages detail all menu items and
the available settings, and explain how these settings control
the operation of your printer.