Filter
Top Products
User’s Guide 19
English
5. Examine each of the coloured circles carefully to determine
which one is most closely matched in colour to the large
area A, then make adjustments as described in the next step.
6. Each primary colour and its current setting is displayed in
turn. Use the ← or → keys to increase or decrease the setting
if required, then press the ENTER key to enter it. An asterisk
(*) will appear in the display.
Bc Reduce cyan setting by 1. If cyan is already set to –2,
then increase magenta and yellow settings by 1.
Bm Reduce magenta setting by 1. If magenta is already
set to –2, then increase cyan and yellow settings by 1.
By Reduce yellow setting by 1. If yellow is already set to
–2, then increase cyan and magenta settings by 1.
Br Increase cyan setting by 1. If cyan is already set to +2,
then reduce magenta and yellow settings by 1.
Bg Increase magenta setting by 1. If magenta is already
set to +2, then reduce cyan and yellow settings by 1.
Bb Increase yellow setting by 1. If yellow is already set
to +2, then reduce cyan and magenta settings by 1.
Bk No adjustment is necessary.
3. Momentarily press and release the MENU 1 / Menu 2 key
so that the message PRINT PATTERN COLOR BALANCE
is displayed.
4. Press the ENTER key. After a short delay the colour balance
test pattern will emerge, and the printer will enter its
adjustment mode.
The test pattern contains a large rectangular area marked A
and 7 coloured circles, marked Bc, Bm, By, Br, Bg, Bb and
Bk.