Filter
Top Products
36
OKIPAGE 8c Plus
Replacing Waste Toner Box
The waste toner box should be replaced after approximately
25,000 pages. When the waste toner box needs replacing a
message to that effect will appear on the operator panel display.
1. Lift the catch and open the left-hand side panel.
4. Locate the bottom of the waste toner box into position near
the bottom of the printer, and push down against spring
pressure.
2. Press down against spring pressure on the top of the waste
toner box (1), pull it outwards and lift it clear of the printer.
3. Position the new waste toner box with its drive coupling
(2) towards the front of the printer and the lifting tab (3) at
the top.
5. Push the top of the waste toner box into the printer so that
the box is upright, then release the downward pressure,
allowing the box to rise.
6. Check that the drive coupling (2) on the waste toner box is
correctly located slightly below and in front of the coupling
on the printer.
7. Close the left-hand side panel.
1
2
3
2
2