34
OKIPAGE 8c Plus
It is essential that each drum be installed in its correct position
in the printer, corresponding with the appropriate coloured label
inside the printer. Each drum assembly is marked with a similar
coloured label for ease of identification.
When to Change a Drum Cartridge
The printer will display a message when any drum cartridge
needs to be replaced. The status lights on the operator panel
will indicate which drum to replace.
You can normally expect a drum cartridge to produce about
12,000 pages.
Also, when installing a new image drum, a new toner cartridge
should also be installed with it. This toner cartridge will run out
more quickly than normal, because the drum reservoir must fill
when new.
Changing a Drum Cartridge
Since the toner cartridge should also be replaced at the same
time, the image drum may be removed with the old toner
cartridge still in place.
1. Switch off the printer main power.
2. Press the OPEN button and raise the top cover to its fully
upright position.
3. Identify by coloured label which drum you intend to replace.
4. Grip the top of the drum assembly and lift it straight up and
out of the printer.